Tunnel guidance and lane delineation system components. Our team can help customize a system setup for your specific application. Select the model of road stud, determine unidirectional or bidirectional, select color options, and include a controller. Customize your system now.
Solar Charged, Model 702 360 Three Mile Aviation Marking Light RCM-D Runway Closure Marker LED Solar Road Stud (SRS) Wind Cones & Obstruction Lights FAA L-806/807 Windcones Wind Cones 8-ft Frangible - L-806 Wind Cone 8-ft & 12-ft - L-807 Signature Series LED Obstruction Lighting - L-810 Obstruction Lighting - L-810
LED POWER Mains (24V DC stud voltage) CONFIGURATION Uni-directional / Bi-directional NO. OF LEDS 6 Uni-directional, 2 x 6 Bi-directional STANDARD COLOURS Amber, red, white and green FREQUENCY Constant or synchronised 2Hz CONTROL Power activated, microprocessor controlled POWER CONSUMPTION 1W (Uni-directional) 2W (Bi-directional) ROAD PLACEMENT
Solar road studs are flashing solar cell powered LED low-maintenance lighting devices that delineate road edges and centrelines. Embedded in the road surface, they are an electronic improvement on the traditional cat's eyes and raised pavement marker in that they may give drivers a larger reaction window.
01 Led Road Studs 02 Smart Road Studs 04 Tunnel Studs 03 Led Studs for signaling Tram passage Studs Catalogue Metrolight SL, Manufacturers and distributors of led studs Metrolight offers the widest range of led studs on the market, aimed at ensuring road safety and signaling on roads, tunnels, highways, motorways, bike lanes, tramway signage
Prepare MS-127 solar road stud for installation. STEP 2. To prevent damage to the installation hole use the appropriate core drilling equipment (5″ Core ) STEP 3. Remove all debris from installation hole. STEP 4. Verify that the installation hole has been drilled straight. STEP 5. Test the placement of the MS-127 solar road stud to insure a
Battery type. ♦ 2'200mAh Li-Polymer ♦ High Temp Ranch (-25°C up to +80 °C) Endurance 1 LED. 1'650mAh (Li-Po) : NOKINA (1 LED) = 550 h (hours) Type of Solar cell. ♦ single Mono crystaline ♦ 50mm x 50mm (0,35Wp / 0,5V) Feature. Not suitable for driving over.
Solar Active Road Stud Unidirectional or Bidirectional road stud with LED illumination White - 2S-4000W30N16-5NFZ (4150k-4500k) Red - 2S-620R30N9-5NFZ Amber - 2S-592Y30N11-5NFZ Blue - 2S-470B30N11-5NFZ prEN 1463-3 ptl (Draft) 100 Hz minimum, with each flash equally spaced GT50/197/0004 2015 Signed b authority of the Secretary of State
The SR-45 unidirectional and the SR-48 bi-directional studs are powerful, robust and 100% waterproof. SR-70 360° Programmable LEDs. Ideal for roads, tunnels, parks and airports, these hardwired 360° LED road studs can be seen from all sides. Bright and robust with the option of programmable functions and remote controlling. Solar Powered
These LED road studs are powered by solar energy captured from natural sunlight by the in-built solar panel and stored in the stud's internal battery. As a result of this active light output, they deliver 10 x greater visibility of the road layout ahead than the traditional retro-reflective road markings, giving drivers up to 900m visibility.
The solar powered road studs contain a Light Emitting Diode (LED) which automatically illuminates during the hours of darkness to provide up to 900m visibility. This allows cyclists and other users to view the pathway ahead clearly, providing them with a greater degree of safety and sense of security. Key Benefits.
Many options are available for the LED light colors (white, green, red, yellow, orange, blue). Likewise, combinations in the same underfloor lamp are possible, e.g. The one LED flashes while the opposite side is operated with steady light in a different color! The two LED slots, which are 180 degrees to each other, have a beam angle of 0˚ to 15˚.
- Inadequate speed (exceeding legal limits): the road stud is on its higher level above ground and has a red light. Speed reduction of vehicles in controlled speed zones Hardwired Road Stud with 2 colors of LED signaling Hardwired Road Stud with 2 levels of elevation SR-90 system warn drivers for the need to reduce the speed to prevent accidents
Uni-directional Led Road Stud. Availability: out of stock 0 item(s Hardwired system for electric network or solar powered. Low maintenance. Operation mode: Steady ...
Solar Raised Pavement Marker / Raised Solar Road Studs-Specifications. Technology Active solar voltaic LED. Material Polycarbonate & Polyester Compound. Dimensions Ø118 x 25mm. Weight 265g. Can stand 60 Tons truck. Normal operating temperature range: -30°C to 70°C. LED Configuration Uni / Bi directional. LEDs per stud 3 per uni directional