| Body material : | Cast Aluminum |
| Power supply: | 5V/80MAH Mono crystalline silicon |
| Battery: | Lithium battery3.2V/1000MAH |
| LED: | 3pcs/side φ10mm super brightness LED |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 180 hrs for flashing modes,40hrs for steady modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >40T(can be installed in the middle of road) |
| Size: | Ф120*50mm（bottom） Ф135*50mm（upper） |
| Weight： | 700g |
| Life span: | 3-5 years with battery |
| Working Temperature | -25 °C~ + 75°C |
| waterproof | IP68 |
Jan 27, 2022 · Aluminum alloy + PC cover not only protects the internal structure of internally illuminated solar road stud NK-RS-X6, including lithium battery 1000mah * 3.2V and white, yellow, blue, red, green LED, but also protects high-performance solar panels. Internally illuminated solar road stud NK-RS-X6 uses solar panel (Monocrystalline 2.5V /120MA
The Culley Marker is, in fact, a Delineation Device, an Internally Illuminated Raised Pavement Marker ( IIRPM ), a Solar Powered, LED, Road Marker. With a low profile of only 16.1mm and diameter of 120mm, Culley Marker is a fully autonomous, solar-powered, transparent, safety device, benefiting all road and pathway users.
Internally illuminated road studs Hardwired Studs Differences to Solar Studs • Up to 14 LED’s in each stud head, in each direction • MUCH brighter • Can be used during Day hours as well • Can be multicoloured / switch colours • Eg: Green normally, Red after an input • Can be externally triggered • Pedestrian pad / Road loop / Video detection
Unlike conventional reflective road markers, Internally Illuminated Pavement Levelled Studs do not rely on headlights to delineate the road ahead. Using bright LEDs, light from each marker can be seen up to 100m (320ft) away during nighttime darkness. For a night or fog use, electronics in the markers monitor ambient light levels, activating the LEDs when the light drops below factory preset levels.
Internally Illuminated Pavement Levelled Stud Installation Procedure: • Check if the solar stud charges and discharges normally • Identify the place for installation • Clean road surfaces • Clean the bottom of the solar stud and use epoxy glue to stick it to the ground • Wait 8 hours for drying before activating the solar stud
What is Internally Illuminated LED Solar Road Stud? SUPER DURABLE: 1. Using the aluminum material to make frame which has better intensity. 2. The mixed epoxy filler (Optional) makes the compression resistance degree be over 30t. 3. The embedded reflectors design can reduce abrasion. HIGH BRIGHT: 1.
Jan 27, 2022 · Light internally illuminated solar road stud has been called “night Guardian” and “luminous elf” for some time in the past. The shape of light internally illuminated solar road stud NK-RS-X6 is generally square. But if you look closely at the size of this light internally illuminated solar road stud NK-RS-X6, you will find that it is
Internally Illuminated Pavement Levelled Stud Installation Procedure: • Check if the solar stud charges and discharges normally. • Identify the place for installation. • Clean road surfaces. • Clean the bottom of the solar stud and use epoxy glue to stick it to the ground. • Wait 8 hours for drying before activating the solar stud. Chat Now
Road Stud Light Factory In Singapore With Spike-RUICHEN Road Stud Tempered Glass Led Solar Road Stud Company In Singapore . Ambe. E-MAIL: info@rctraffic.com. TEL: +86 15238616235.
These LED road studs are powered by solar energy captured from natural sunlight by the in-built solar panel and stored in the stud’s internal battery. As a result of this active light output, they deliver 10 x greater visibility of the road layout ahead than the traditional retro-reflective road markings, giving drivers up to 900m visibility.
Internally Illuminated Solar Road Stud Marker with 6 Aluminum Complies with the latest requirements of DPWH. Load Capacity: >40 tons,this solar road stud marker is very popular in Philippines. Security Feature: With 6 Aluminum Alloy Safety Locks. Battery: Lithium battery 1000mAh*3.2V. Size: φ150*50mm / φ143*47mm. Inquiry
Internally Illuminated Led Road Stud With Anchors Body material: Aluminum(GB-ADC12)+PC(Japan Brand) Power supply: USA Brand High Efficient Solar Panel Battery: NI-MH1.2V/600MAH; Lithium battery3.2V/500MAH(Made in Japan); Resistance: >30T LED Color: White, Yellow, Blue, Red, Green Size: L125mm*W107mm*H26+50mm
Internally Illuminated Solar Road Stud Features: 1. Visual Distance :>1000meters 2. Work Temperature:-20ºC~+80ºC 3. Material: Anti-yellowing Pctcast aluminum housing 4. Product Size : Dia133*47mm 5. Protect Level: IP68; Your browser can’t play this video. Learn more Watch on Internally Illuminated Solar Road Stud Company NOKIN Traffic
G105 solar road stud Internally Illuminated Solar Road Stud Feature: l Above the ground:1 mm only, level to the road, motorcycle, bicycle, and snow clearer friendly l High load- bearing, high impact resistance, friction resistance, corrosion resistance l 4sides emit light, making a stronger visual impact feeling
These LED road studs are powered by solar energy captured from natural sunlight by the in-built solar panel and stored in the stud’s internal battery. As a result of this active light output, they deliver 10 x greater visibility of the road layout ahead than the traditional retro-reflective road markings, giving drivers up to 900m visibility.
