| Body material : | Cast Aluminum |
| Power supply: | 5V/80MAH Mono crystalline silicon |
| Battery: | Lithium battery3.2V/1000MAH |
| LED: | 3pcs/side φ10mm super brightness LED |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 180 hrs for flashing modes,40hrs for steady modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >40T(can be installed in the middle of road) |
| Size: | Ф120*50mm（bottom） Ф135*50mm（upper） |
| Weight： | 700g |
| Life span: | 3-5 years with battery |
| Working Temperature | -25 °C~ + 75°C |
| waterproof | IP68 |
L.E.D. Illuminated Road Marker Systems. We are very proud to be the leading manufacturer of solar powered L.E.D. illuminated road marker systems: the next generation of pavement marker systems. Reliable and durable quality has been proved for over 24 years.
Solar Road Marker ( Embedded Design) Installation Size: Dia.80 X 30mm. 1 or 2 directions customized. 360 degree illuminated. 3.5mm after installation . SRS01100A. Solar Road Marker ( Embedded Design) Installation Size: Dia.100 X 26mm. 1 LEDs on the top. 360 degree illuminated. 3.5mm after installation. Aluminum Embedded Solar Road Stud
Led Solar Road Stud. Reusable Solar powered Led road studs. Aluminum die-casting and polycarbonate. Minimizes the damage in road surface work. Front, rear, and side omni-directional lighting with excellent visibility (over 320 feet) Special schematic design- 5 to 7 days runtime even in snow or rain. Inner module replaceable, easy maintenance.
AL solar pavement markers warning stud loading bearing 40 tons double side solar pavement markers Dia 143mm 30T Compression glass solar pavement markers warning stud
Nov 11, 2022 · If the LED aluminum solar road stud is installed in scenic spots, ecological parks or other places, the following operations should be taken to effectively install the LED aluminum solar road stud. Especially in the new rural planning, the installation of LED aluminum solar road stud on the road surface.
Solar Road Studs:These are flashing or steady solar cell powered LED maintenance-free lighting devices. They are embedded in the road surface, and are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices.
plastic solar pavement markers with 6 bolts 30T CompressionYellow Plastic Solar Powered Pavement Markers With Stem网页Load Bearing: More Than 30 Tons Warranty: 18 Months Body mate
KM 654e-20160606133636. Solar Pavement Levelled Marker/Stud (Flush Type), Type G105, 12NOKINm dia. X 45 mm depth; (Available Color: Blue, Green, Red, White and Yellow) Concrete Epoxy “A” & “B” Consumable Diamond Core Bit DD-B 122mm/430mm + UCL (Coring Plate) Consumable Connection End BI-1 (Coring Blade/Cutter) Consumable Water. Quote Now.
Hardoll Solar road stud lights Solar road studs are solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and center lines. Embedded in the road surface, they are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window
Road Studs – Reflective Raised Pavement Marker. Supplies reflective road reflectors in different materials such as plastic, aluminum, ceramic and glass. Both glass beads and cat eye are available. Tel: 0086-25-57070536 Mobile & WhatsApp: 008618805180339 Email: info@roadskysafety.com Address: NO.76 Panxin Road, Nanjing. Quote Now.
Our solar pavement road markers are roadway traffic proven with a 30 ton rolling resistance rating. The physical size of the SRPM Editorial Review These weather proof reflective solar raised pavement markers (SRPM) have a blue reflector on each side with a total of 4 constantly on blue LEDs. Solar road stud – YouTube
Apr 17, 2021 · This high-qualified solar road stud NK-RS-A6-1 is covered by aluminum (GB-ADC12) and PC (Japan Brand) shell, which can bear big pressure and have the load capacity of more than 30t. Therefore, the solar road stud NK-RS-A6-1 can be installed in the middle of road. The size of solar road stud NK-RS-A6-1 is L125mm*W107mm*H26+50mm.
Raised Pavement Markers. Adhesive EPOXY Pads are used to secure the SOLAR LED markers to asphalt or concrete. Installation Instructions are provided with step by step photos of the process. $10.00USD EA. $80.00USD/10pack. White fixture, White LED light one side / Red LED light one side – LED lights visible over ½ mile, rated 20 tons PSI
The advantages of solar road stud: 1. High brightness. The brightness of ordinary reflective road stud is only 300 MCD to 400 MCD, while the brightness of led solar road stud can be up to 2000 MCD, 6 to 7 times of the former. The high brightness light from the led road stud can penetrate fog at night to guide the driver safely and effectively. 2.
Power supply: USA Brand High Efficient Solar Panel Battery: NI-MH1.2V/600MAH; Lithium battery3.2V/500MAH(Made in Japan); Resistance: >30T LED Color: White, Yellow, Blue, Red, Green Size: L125mm*W107mm*H26+50mm
